The Schedule Job Window  

When "Write" is the selected Job Type, the Advanced Key rules are in force for applicable Trunking Systems and Trunking Personalities.

When "Write" is the selected Job Type, and the Connection Method is Over the Air Programming "OTAP", very specific OTAP rules are in force...see: Programming for Radio Management OTAP.

A job's "Start After" and "End Before" range defined in this window are also subject to RM Server to Device Programmer polling (for radio presence) at 1 hour intervals; therefore, you must define a job Start and End Time range that allows for this 1 hour polling interval.

When a codeplug containing ADP Keys is "Read" from a radio, the ADP Keys are not loaded into the Radio Management Client, which causes the Selectable ADP Key Data field(s) to appear in all asterisks (*). In this situation, if this codeplug's template is used to "Write" to another radio, the ADP Key Data will not be written. If writing ADP Key Data to other radios is desired, you must re-enter the appropriate ADP Keys into this template's Selectable ADP Key Data field(s), prior to initiating the "Write" job. Template ADP Key Data overwrites a target radio’s ADP Key Data when present.

However, when a codeplug file containing ADP Keys is imported into the Radio Management Client (see "Import" è "Radios" from the Actions Menu), the ADP Keys are loaded into the CPS, and are therefore able to be written to target radios. Template ADP Key Data overwrites a radio’s ADP Key Data when present.

Pre-loaded Secure Encryption Keys are ERASED from the Radio . . .

When the Secure Operation field is set to "Hardware" in a radio, and a "Write" job upgrades the radio's firmware, through a FLASHport Feature Set Upgrade and / or a Refresh Firmware Upgrade (see Manage Firmware and the Right-Click Menu's "Upgrade" selections); therefore, the target radio(s) Secure Encryption Keys must be reprogrammed via a Key-Variable Loader (KVL) following completion of the scheduled job.

To launch this Schedule Job window, in order to create a read or write job: From the Radio Management Client's Radio View, with the desired radio record / row highlighted, click the orange Schedule Job button, or right-click directly on a highlighted radio(s) and then select "Schedule" in the popup menu.

To select multiple radios, hold down the CTRL key, then select the desired radios.

A radio cannot be selected for more than one job at a time.

For POP25 FIP Mode programming:

The OTA Fixed IP Address must be defined for a radio's codeplug,

AND

The Scheduled Job's Connection Method must be set to "POP25" or "Any",

AND

FIP Mode is then available In the Device Programmer (DP) / Device Monitor...

When the DP's Communication Method is set to "Over the Air", and

when the DP's ARS Alias is set to "None".

(In this scenario, once the presence of a radio with a defined OTA Fixed IP Address is detected, only FIP Mode jobs are sent from the Server to be executed.)